Micron Mustafa Machines In.
Micron Mustafa Machines In.
Sangli, Maharashtra
GST No. 27AMTPB3937C1Z2
TrustSEAL Verified
SEND SMS
SEND EMAIL

Valve Seat Cutting Machines

Our product range includes a wide range of vsg8x valve seat cutting machine, vsg8 valve seat cutting machines, vsg6a plus valve seat cutting machine, vsg6a valve seat cutting machine, vsg6 valve seat cutting machine and vsg4x valve seat cutting machine.

VSG8X Valve Seat Cutting Machine

VSG8X Valve Seat Cutting Machine
  • VSG8X Valve Seat Cutting Machine
  • VSG8X Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 12.5 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Automation GradeManual
Valve Seat Diameter Standard25 mm - 50 mm
Valve Seat Diameter Optional14 mm-102 mm
Maximum Cylinder Head Length (with 360 Degree rollover fixture)(38") 980 mm
Maximum Cylinder Head Length (with Ex-Parallel fixture)(44") 1120 mm
Maximum Spindle Stroke(8 ") 204 mm
Maximum Tilt (either side of zero)12 Degrees
Distance from Table to Spindle(18.5") 475 mm
Spindle Speed50 to 880 RPM
Air Requirements(7 Bar) 100 PSI, 6 CFM
Dimension1860 X 810 X 2250 mm
Gross Shipping Weight1250 kg Approx.
BrandMicron
Model NumberVSG8X
Phase3 Phase
Required Current3.2 Amp.
Motor Power2 HP (1.5 kW)

Other Feature:The Micron VSG8X uses the proven fixed carbide pilot tooling with front mount steering wheel for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed.VSG8X Spindle powered by 2Hp (1.5kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 880 Rpm . This control Gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats Found in today’s CNG Engines.
VSG8X Spherical Centering System With Solenoid Locking, Power Head And Work head Air Floats Independently in 3axis to insure Fast And Accurate Guide Centering
Micron VSG8X machines are manufactured from heavy thick wall cast iron. The all cast iron Rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum
Accurate chatter free valve seat cutting.
All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.
Three Angle Single Blades Inserts Cuts All Three Angles At Once And Produce Accurate Finished Seat With” No Grinding”  No Lapping”. They Assure Exact Seat Width From Head To Head Plus Concentricity Between Seat And Guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For Machining of All New Generation Imported and Indian Cylinder Head .  
Advance Design of Spindle Adopter Assembly with Pilot  Lock mechanism reduced time to complete job with less runout and Better Concentricity.     
Takes Minimum Floor Space to Handle the Complete Range Of Heavy Automotive and Industrial Cylinder Heads
Dial In Variable Spindle Speed 50 to 880 Rpm Without Stopping the Rotation

Request
Callback
Yes! I am Interested

VSG8 Valve Seat Cutting Machines

VSG8 Valve Seat Cutting Machines
  • VSG8 Valve Seat Cutting Machines
  • VSG8 Valve Seat Cutting Machines
Get Best Quote
Approx. Price: Rs 11.5 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG8
BrandMicron
Automation GradeManual
Capacity14mm to 102mm
Power SourceElectric
Current Ampere1.8 Amp.
Valve Seat Diameter25 mm - 50 mm
Maximum Cylinder Head Length44"or 1120 mm ( with Ex-Parallel fixture))
Maximum Spindle Stroke( 8 ") 204 mm
Maximum Tilt12 Degrees (Either Side Of Zero)
Distance From Table to Spindle( 18.5") 475 mm
Spindle Speed30 - 400 rpm
Phase3 Phase
Power1.0 Hp
Air Requirements(7 Bar) 100 PSI, 6 CFM
Gross Shipping Weight1250 kg Approx
Dimension1860 X 810 X 2250 mm

Other Features: The Micron VSG8 uses the proven fixed carbide pilot tooling with front mount steering wheel for spindle downfeed. The machine has two modes of operation , Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed.
VSG8 Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Inverter to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines.
VSG8 Spherical Centering System With Solenoid Locking, Power Head And Work head Air Floats Independently in 3 axis to insure Fast And Accurate Guide Centering.
Micron VSG8 machines are manufactured from heavy thick wall cast iron. The all cast iron rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum Accurate chatter free valve seat cutting. All Cast Parts Are Flame Hardened and Stress Relieved, which Will lead to Repeated Accuracy and Long Last.
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no  grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For Machining of All New Generation Imported and Indian Cylinder Head.
Advance Design of Spindle Adapter Assembly with pilot Lock mechanism reduced time to complete job with less runout and Better concentricity.
Takes Minimum Floor Space to Handle the Complete Range Of Heavy Automotive and Industrial Cylinder Heads
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation

Request
Callback


Additional Information:

  • Delivery Time: 6 weeks
  • Packaging Details: Wooden Box
Yes! I am Interested

VSG6A Plus Valve Seat Cutting Machine

VSG6A Plus Valve Seat Cutting Machine
  • VSG6A Plus Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 10.4 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG6APlus
BrandMicron
Automation GradeManual
Valve Seat Diameter Standard25 mm - 50 mm
Valve Seat Diameter Optional14 mm-102 mm
Maximum Cylinder Head Length (with 360 Degree rollover fixture)(38") 980 mm
Maximum Cylinder Head Length (with Ex-Parallel fixture)(44") 1120 mm
Maximum Spindle Stroke(8") 204 mm
Maximum Tilt (either side of zero)12 Degrees
Distance from Table to Spindle(17.5") 445 mm
Spindle Speed30 to 400 RPM
Air Requirements(7 Bar) 100 PSI,6 CFM
Dimension1860 X 810 X 2175 mm
Gross Weight1150 kg Approx
Phase3 Phase
Current Required1.8 Amp
Motor Power1 Hp

Other Information:
Micron VSG6A Plus Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering with front mount steering wheel for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed. 
VSG6APlus Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines
 VSG6APlus Opts Spindle adopter Collet type for Ball holder that Eliminates Bounce  Spring that Other Use Over Their Pilots, The result is reduced time to complete job with less runout and Better Concentricity. 
Micron VSG6A Plus machines are manufactured from heavy thick wall cast  iron. The all cast iron rigid platform is precision machined providing superior  Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum  Accurate chatter free valve seat cutting.All Cast Parts Are Flame Hardened and Stress Relived, which will lead to Repeated Accuracy  and Long Last .
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For  Machining of All New Generation Imported and Indian Cylinder Head   
Takes Minimum Floor Space to Handle the Complete Range Of Heavy Automotive and Industrial Cylinder Heads
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation 

Request
Callback
Yes! I am Interested

VSG6A Valve Seat Cutting Machine

VSG6A Valve Seat Cutting Machine
  • VSG6A Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 9.7 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG6A
BrandMicron
Max Cutting Thickness75mm
Automation GradeManual
Usage/ApplicationValve Seat Cutting
Capacity75mm
Gas SupplyAir Supply
Power Source1Hp
Frequency50Hz
Voltage440 V
Spindle Speed30 to 400 Rpm

Other Information:
Micron VSG6A Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering with Side Hand wheel for spindle downfeed. The machine has two modes of operation, Side Hand Wheel for Rapid control feed and front Knob wheel for Precise Fine Feed. 
VSG6A Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines
VSG6A Opts Spindle adopter Collet type for Ball holder  Eliminates Bounce  Spring that Other Use Over Their Pilots, The result is reduced time to complete job with less runout and Better Concentricity. 
Micron VSG6A machines are manufactured from heavy thick wall cast  iron. The all cast iron rigid platform is precision machined providing superior  Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum  Accurate chatter free valve seat cutting.All Cast Parts Are Flame Hardened and Stress Relived, which will lead to Repeated Accuracy  and Long Last .
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For  Machining of All New Generation Imported and Indian Cylinder Head   
Takes Minimum Floor Space to Handle the Complete Range Of Heavy Automotive and Industrial Cylinder Heads
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation 

Request
Callback
Yes! I am Interested

VSG6 Valve Seat Cutting Machine

VSG6 Valve Seat Cutting Machine
  • VSG6 Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 9.3 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG6
BrandMicron
Max Cutting Thickness75mm
Automation GradeManual
Usage/ApplicationValve Seat Cutting
Capacity75mm
Gas SupplyAir Supply
Power Source1Hp
Frequency50Hz
Voltage440 V

Other Information:Micron VSG6 Single Air Float Centering System, Power Head Air Float insure Fast And Accurate Guide Centering with Side Hand wheel for spindle downfeed. The machine has two modes of operation, Side Wheel for Rapid control feed and front Knob wheel for Precise Fine Feed. VSG6 Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 380 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines VSG6 Advance Design of Spindle result to complete job with less runout and Better Concentricity.  Micron VSG6 machines are manufactured from heavy thick wall cast  iron. The all cast iron rigid platform is precision machined providing superior  Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum  Accurate chatter free valve seat cutting.All Cast Parts Are Flame Hardened and Stress Relived, which will lead to Repeated Accuracy  and Long Last .Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For  Machining of All New Generation Imported and Indian Cylinder Head   Takes Minimum Floor Space to Handle the Complete Range Of Heavy Automotive and Industrial Cylinder HeadsDial In Variable Spindle Speed 30 to 380 Rpm Without Stopping the Rotation

Request
Callback
Yes! I am Interested

VSG4X Valve Seat Cutting Machine

VSG4X Valve Seat Cutting Machine
  • VSG4X Valve Seat Cutting Machine
  • VSG4X Valve Seat Cutting Machine
  • VSG4X Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 10.2 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG4X
BrandMicron
Automation GradeManual
Power SourceElectric
Dimension Lx W X H Mm1520 X 810 X 2250 mm
Gross Shipping Weight900 kg Approx
Air Requirements(7 Bar) 100 PSI, 6 CFM
Valve Seat Diameter Standard22 mm - 50 mm
Valve Seat Diameter Optional14 mm-72 mm
Maximum Cylinder Head Length (with 360 Degree rollover fixture)( 25") 640 mm
Maximum Cylinder Head Length (with Ex-Parallel fixture)( 30") 780 mm
Maximum Spindle Stroke(8") 204 mm
Maximum Tilt (either side of zero)12 Degrees
Distance from Table to Spindle(18.5") 475 mm
Spindle Speed30 to 400 Rpm
Phase3 Phase
Current Required1.8 Amp
Motor Power1 Hp

Other Features:
The Micron VSG4X uses the proven fixed carbide pilot tooling with front mount steering wheel for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed Rate.
VSG4X Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor
Frequency Invertor to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines.
VSG4X Spherical Centering System With Solenoid Locking, Power Head And Work head Air Floats Independently in 3 axis to insure Fast And Accurate Guide Centering.
Micron VSG4X machines are manufactured from heavy thick wall cast iron. The all cast iron rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum
Accurate chatter free valve seat cutting. All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.
Three angle single blades insert cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For Machining of All New Generation Imported and Indian Cylinder Head.
Advance Design of Spindle Adopter Assembly with pilot lock mechanism reduced time to complete job with less runout and Better Concentricity.
Takes Minimum Floor Space to Handle the Complete Range Of Small Cars, Passenger Car & Pick Van/trucks Cylinder Heads.
Dial In Variable Spindle Speed 30 to 400 Rpm Without
Stopping the Rotation.

Request
Callback
Yes! I am Interested

VSG4A Plus Valve Seat Cutting Machines

VSG4A Plus Valve Seat Cutting Machines
  • VSG4A Plus Valve Seat Cutting Machines
Get Best Quote
Approx. Price: Rs 9.6 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG4A Plus
BrandMicron
Automation GradeManual
Valve Seat Diameter Standard22 mm - 50 mm
Valve Seat Diameter Optional14 mm- 72 mm
Maximum Cylinder Head Length (with 360 Degree Roll over Fixture)(25") 640 mm
Maximum Cylinder Head Length (With Ex-Parallel Fixture)(30") 780mm
Maximum Spindle Stroke(8") 204 mm
Maximum Tilt (Either Side Of Zero)12 Degrees
Distance from Table to Spindle(17.5") 445 mm
Spindle Speed30 - 400 RPM
Electrical Requirements1.0 HP
Phase3 Phase
Current Ampere1.8 Amp.
Air Requirements(7 Bar) 100 PSI,6 CFM
Dimension1520 X 810 X 2175 mm
Gross Shipping Weight900 kg

Other Features :
Micron VSG4A Plus Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering with front mount steering wheel
for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed.
VSG4A Plus Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines.
VSG4A Plus Opts Spindle adopter Collet type for Ball holder that Eliminates Bounce Spring that Other Use Over Their Pilots, The result is reduced time to complete job with less runout and Better Concentricity.
Micron VSG4A Plus machines are manufactured from heavy thick wall cast iron. The all cast iron rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum
Accurate chatter free valve seat cutting. All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For Machining of All New Generation Imported and Indian Cylinder Head.
Takes Minimum Floor Space to Handle the Complete Range Of Small Cars, Passenger Car & Pick Van/trucks Cylinder Heads
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation.

Request
Callback
Yes! I am Interested

VSG4A Valve Seat Cutting Machine

VSG4A Valve Seat Cutting Machine
  • VSG4A Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 9.2 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG4A
BrandMicron
Max Cutting Thickness65mm
Automation GradeManual
Usage/ApplicationValve Seat Cutting
Capacity65mm
Gas SupplyAir Supply
Power Source1Hp
Frequency50hz
Voltage440 V
Spindle Speed30 to 380 Rpm

Other Information:
Micron VSG4A Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering with Side Hand wheel for spindle downfeed. The machine has two modes of operation, Side Hand Wheel for Rapid control feed and front Knob wheel for Precise Fine Feed. 
VSG4A Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 380 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines
 VSG4A Opts Spindle adopter Collet type for Ball holder that eliminates Bounce  Spring that Other Use Over Their Pilots, The result is reduced time to complete job with less runout and Better Concentricity. 
Micron VSG4A machines are manufactured from heavy thick wall cast  iron. The all cast iron rigid platform is precision machined providing superior  Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum  Accurate chatter free valve seat cutting.All Cast Parts Are Flame Hardened and Stress Relived, which will lead to Repeated Accuracy  and Long Last .
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For  Machining of All New Generation Imported and Indian  Cylinder Head   
Takes Minimum Floor Space to Handle the Complete Range Of LCV, tempo, passenger cars and motorcycles Heads
Dial In Variable Spindle Speed 30 to 380 Rpm Without Stopping the Rotation 

Request
Callback
Yes! I am Interested

VSG4 Valve Seat Cutting Machine

VSG4 Valve Seat Cutting Machine
  • VSG4 Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 8.8 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVSG4
BrandMicron
Max Cutting Thickness65mm
Automation GradeManual
Usage/ApplicationValve Seat Cutting
Capacity65mm
Gas SupplyAir Supply
Power Source1HP
Frequency50hz
Voltage440 V
Spindle Speed30 to 380 Rpm

Other Information:Micron VSG4 Single Air Float Centering System, Power Head Air Float insure Fast And Accurate Guide Centering with Side Hand wheel for spindle downfeed. The machine has two modes of operation, Side Wheel for Rapid control feed and front Knob wheel for Precise Fine Feed. VSG4 Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 380 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines VSG4 Advance Design of Spindle result to complete job with less runout and Better Concentricity.  Micron VSG4 machines are manufactured from heavy thick wall cast  iron. The all cast iron rigid platform is precision machined providing superior  Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum  Accurate chatter free valve seat cutting.All Cast Parts Are Flame Hardened and Stress Relived, which will lead to Repeated Accuracy  and Long Last .Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For  Machining of All New Generation Imported and Indian Cylinder Head .
Takes Minimum Floor Space to Handle the Complete Range Of LCV, tempo, passenger cars and motorcycles Cylinder Heads Dial In Variable Spindle Speed 30 to 380 Rpm Without Stopping the Rotation

Request
Callback
Yes! I am Interested

VSG2X Valve Seat Cutting Machine

VSG2X Valve Seat Cutting Machine
  • VSG2X Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 6.3 Lakh / UnitGet Latest Price

Product Details:

Model Name/NumberVSG2X
BrandMicron
Automation GradeManual
Valve Seat Diameter Standard20 mm - 32 mm
Valve Seat Diameter Optional14 mm-50 mm
Maximum Cylinder Head Length (with 360 Degree rollover fixture)( 13") 340 mm
Maximum Cylinder Head Length (with Ex-Parallel fixture)(18") 480 mm
Maximum Spindle Stroke(7 ") 180mm
Maximum Tilt (either side of zero)12 Degree
Distance from Table to Spindle( 18.5") 475 mm
Spindle Speed30 to 400 RPM
Air Requirements(7 Bar) 100 PSI, 6 CFM
Dimension1220 X 810 X 2175 mm
Gross Shipping Weight600 kg Approx.
Phase1 Phase
Required Current2.8 Amp
Motor Power1 HP

Other Features:
The Micron VSG2X uses the proven fixed carbide pilot tooling with front mount steering wheel for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed Rate.VSG2X Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor.
Frequency Inverter to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines.
VSG2X Spherical Centering System With Solenoid Locking, Power Head And Work head Air Floats Independently in 3 axis to insure Fast And Accurate Guide Centering.
Micron VSG2X machines are manufactured from heavy thick wall cast iron. The all cast iron rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum
Accurate chatter free valve seat cutting. All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For Machining of All New Generation Imported and Indian Cylinder Head.
Advance Design of Spindle Adapter Assembly with Pilot Lock Mechanism reduced time to complete job with less runout and Better Concentricity.
Takes Minimum Floor Space to Handle the Complete Range Of Bike, Motorcycle ,Single & Twin Cylinder Heads.Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation.
Takes Minimum Floor Space to Handle the Complete Range Of Bike, Motorcycle ,Single & Twin Cylinder Heads.
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation.

Request
Callback
Yes! I am Interested

VSG2A Plus Valve Seat Cutting Machine

VSG2A Plus Valve Seat Cutting Machine
  • VSG2A Plus Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 5.7 Lakh / UnitGet Latest Price

Product Details:

Model Name/NumberVSG2A Plus
BrandMicron
Automation GradeManual
Dimension Lx W X H Mm1220 X 810 X 2175 mm
Valve Seat Diameter Standard20 mm - 32 mm
Valve Seat Diameter Optional14 mm-50 mm
Maximum Cylinder Head Length (With 360 Degree Roll over Fixture)(13") 340 mm
Maximum Cylinder Head Length (With Ex-Parallel Fixture)(18") 480 mm
Maximum Spindle Stroke(7") 180 mm
Maximum Tilt (Either Side Of Zero)12 Degrees
Distance from Table to Spindle(17.5") 445 mm
Spindle Speed30 - 380 RPM
Current Ampere2.8 Amp.
Electrical Requirements1 Hp
Air Requirements( 7 Bar) 100 PSI,6 CFM
Gross Shipping Weight600 kg

Other Feature:
Micron VSG2APlus Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering with front mount steering wheel
for spindle downfeed. The machine has two modes of operation, Front Wheel for Rapid control feed and Side Knob wheel for Precise Fine Feed
VSG2APlus Spindle powered by 1Hp(0.75kW) High Torque AC Spindle Motor Frequency Invertor to control spindle torque throughout the speed range 400 Rpm . This control gives maximum torque at all speeds resulting in fine surface finish even with the hardest valve seats found in today’s CNG Engines.
VSG2APlus Opts Spindle adopter Collet type for Ball holder that Eliminates Bounce Spring that Other Use Over Their Pilots, The result is reduced time to complete job with less runout and Better Concentricity.
Micron VSG2APlus machines are manufactured from heavy thick wall cast iron. The all cast iron rigid platform is precision machined providing superior Accuracy as compared to fabricated steel. Rigidity is vital in producing Optimum
Accurate chatter free valve seat cutting. All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.
Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentricity between seat and guide.
Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For
Machining of All New Generation Imported and Indian Cylinder Head
Takes Minimum Floor Space to Handle the Complete Range Of Small Cars, Passenger Car &
Pick Van/trucks Cylinder Heads
Dial In Variable Spindle Speed 30 to 400 Rpm Without Stopping the Rotation

Request
Callback
Yes! I am Interested

VSG2A Valve Seat Cutting Machine

VSG2A Valve Seat Cutting Machine
  • VSG2A Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 5 Lakh / UnitGet Latest Price

Product Details:

Automation GradeManual
BrandMicron
Model Name/NumberVSG2A
Valve Seat Diameter Standard20 mm - 32 mm
Valve Seat Diameter Optional14 mm-50 mm
Maximum Cylinder Head Length (With 360 Degree Roll over Fixture)(13") 340 mm
Maximum Cylinder Head Length (With Ex-Parallel Fixture)(18") 480 mm
Maximum Spindle Stroke(7") 180 mm
Maximum Tilt (Either Side Of Zero)12 Degrees
Distance from Table to Spindle(17.5") 445 mm
Spindle Speed30 - 400 RPM
Current Ampere2.8 Amp
Electrical Requirements1 Hp
Air Requirements( 7 Bar) 100 PSI,6 CFM
Gross Shipping Weight600 kg
Dimension1220 X 810 X 2175 mm

Other Features:

Micron VSG2A Double Air Float Centering System, Power Head And Work Head Air Floats Independently to insure Fast And Accurate Guide Centering.

Modern Modular Machine Bed Design For Improved Rigidity.

Machine is Made out of Quality Alloy of Graded Casting to Ensure Vibration Free Operation.

All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.

Three angle single blades insert cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus. concentrically between seat and guide.

Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axis For machining of All New Generation Imported and Indian Cylinder Head.


Takes Minimum Floor Space to Handle the Complete Range Of Bike, Motorcycle ,Single & Twin Cylinder Heads.

Dial In Any Spindle Speed 30 to 400 Rpm Without Stopping the Rotation.

User Friendly Ergonomic Design

Request
Callback
Yes! I am Interested

VSG2 Valve Seat Cutting Machine

VSG2 Valve Seat Cutting Machine
  • VSG2 Valve Seat Cutting Machine
Get Best Quote
Approx. Price: Rs 4.2 Lakh / UnitGet Latest Price

Product Details:

Model Name/NumberVSG2
BrandMicron
Automation GradeManual
Valve Seat Diameter Standard20 mm - 32 mm
Valve Seat Diameter Optional14 mm-50 mm
Maximum Cylinder Head Length (With 360 Degree Rollover Fixture)( 13") 340 mm
Maximum Cylinder Head Length (with Ex-Parallel Fixture)( 18") 480 mm
Maximum Spindle Stroke( 7 ") 180 mm
Maximum Tilt (Either Side Of Zero)12 Degree C
Distance From Table To Spindle(17.5") 445 mm
Spindle Speed30 to 380 RPM
No of PhaseSingle Phase
Current Ampere2.8 Amp.
Power in H.P1 Hp
Air Requirements(7 Bar) 100 PSI, 6 CFM
Dimension1220 X 810 X 2175 mm
Gross Weight600 kg

Other Features:

Micron VSG2 Single Air Float Centering System, Light Weight Power Head “Air Floats” on Rail Parallel to Table give Accurate and Fast Centering to Guide.

Modern Modular Machine Bed Design For Improved Rigidity.

Machine is Made out of Quality Alloy of Graded Casting to Ensure Vibration Free Operation.

All Cast Parts Are Flame Hardened and Stress Relived, which Will lead to Repeated Accuracy and Long Last.

Three angle single blades inserts cuts all three angles at once and produce accurate finished seat with” no grinding” ” no lapping”. They assure exact seat width from head to head plus concentrically between seat and guide.

Spindle Head Tilts to 12 degree on both Sides to accommodate any Guide Axi s For machining of All New Generation Imported and Indian Cylinder Head.


Takes Minimum Floor Space to Handle the Complete Range Of Bike, Motorcycle ,Single & Twin Cylinder Heads Dial.

In Any Spindle Speed 30 to 380 Rpm Without Stopping the Rotation.

Request
Callback
Yes! I am Interested
X

Product Videos

Explore More Product



Reach Us
Aiyaz Bargir (Operation Manager)
216 B/ Mahaveernagar Vakharbhag
Sangli - 416416, Maharashtra, India



Call Us


Send E-mailSend SMS